How to Select an Air Conditioning contractor can be the most important step of getting a brand new central heating system installed. Ask any contractors for references.
If you’re changing your existing central heating system, tell your new contractor what you like and dislike about the old system. It is also recommended to ask about the various duct work and ductwork systems the contractor uses. You might want to have this information before you sign on the dotted line.
Once you have identified what exactly you want, determine whether you want an air conditioner that is ductless or a ducted air conditioner. It is not always necessary to use ductless air conditioners if there are a lot of leaks or gaps in your duct work. This is especially important if the central heating unit is located in a high traffic area with lots of foot traffic. HVAC experts recommend that when selecting an air conditioning contractor, choose someone who has been in the business for several years and is experienced at working with ducts and ductwork systems.
Your next step is to interview the air conditioner contractor and ask for references. Make sure you find out their qualifications, their training, and any other issues that may arise during the installation process. The contractor will have a few different tasks that need to be completed; some of these tasks include:
Ducts: The contractor will have to open all the ducts and replace all broken or damaged ones. Be sure to find out what kind of system they use and whether or not it is one of the newer generation of duct systems. This will help you narrow down your choices and make the best decision possible about the contractor.
Ductwork Systems: Many air conditioners come with ductwork systems built into them. If you would like to replace these ductwork systems, make sure you find out what kind of systems are available, as well as the cost of each type. Check with your air conditioning company if they have any advice about which ducts or systems are appropriate.
Heat Exchangers: A new air conditioner will come with a ductwork system that will allow it to run through to a control panel where the ductwork system will connect. This allows the air conditioner to regulate its temperature and cool off quickly if the air in the room is too hot. You’ll also need to install heat exchangers between the ductwork system and the control panel in order to eliminate drafts from escaping.
Control Panel: You’ll need a control panel that allows the installer to control the thermostat, so that when the temperature in the room is adjusted, the thermostat automatically adjusts the heater or air conditioner to the proper setting. Look for one that has multiple settings. It will be easier to monitor the temperature in your home if you can check on the temperature as you need it. Most control panels come with a dimmer to automatically adjust the thermostat according to the temperature of the room.
Hoses, Chimney, and Saves: The contractor will have to install the ductwork, which connects the ductwork systems together and gives you the ability to adjust the temperature. Most times, this ductwork is insulated and can be installed by yourself. Other times, you may need to hire a professional to install it properly.
Control Panel and Control: When the control panel comes together, you’ll need to install the control panel wiring. It will give you the ability to program the settings for the air conditioner to automatically run when you leave the room. and turn the heater or air conditioner on when you return.
Exterior Holes: Air conditioners come with ductwork systems that allow you to open and close the ductwork so that you can control the air conditioner or heater depending on the temperature outside of the room. If you choose a contractor that doesn’t have ductwork systems, you’ll need to make sure that they have the appropriate holes drilled for these ductwork systems. These holes will be located on the outside of the house.
For more detailed information on each of these services, contact your air conditioning company to discuss your options. They can tell you about any other necessary steps you will need to take in order to install the ductwork.